FiltersDone

Question type

Essay

Multiple Choice

Short Answer

True False

Matching

Exam 12: Pricing Masonry, Carpentry and Finishes Work

Show Answer

Share

---

All types

Filters

Study FlashcardsPractice ExamLearn

Question 1

Multiple Choice

Review LaterAdd Note

Review Later

____ lumber is sawn lumber that has not been surfaced.

A) Rough
B) Shop
C) Yard
D) Finish

Correct Answer

verified

Show Answer

Question 2

Multiple Choice

Review LaterAdd Note

Review Later

____ is lumber used for general building purposes.

A) Shop lumber
B) Yard lumber
C) Finish lumber
D) Factory lumber

Correct Answer

verified

Show Answer

Question 3

True/False

Review LaterAdd Note

The price of masonry bricks and blocks varies over a wide range depending on the size, type, and color of units required.

Factory and ____ lumber is lumber selected for remanufacturing use.

The amount of nails required for rough carpentry can be roughly determined by allowing ____ lbs of nails for every 1000 board feet of lumber.

Allowable stresses are specified according to ____ of lumber and grade within each of the categories.

Which of the following is NOT considered a job factor that influences the price of rough carpentry?

Lumber is graded according to all of the following categories EXCEPT _____________.

A ____% allowance for waste is considered appropriate on finish carpentry materials.

In the residential industry especially, a subcontractor will offer to perform carpentry framing work at a ____ of building area.

Material prices are determined from suppliers who are required to quote prices to supply and deliver items that meet specifications.

The size of lumber is stated in accordance with its __________ size.

Lumber is generally available in lengths that are multiples of ____ feet.

Higher outputs can be expected when constructing columns, pilasters, and curved work rather than long lengths of plain walls.

Hand tools and some crane time for unloading and hoisting are seldom required with the installation of finish carpentry.

The amount of nails required for rough carpentry can be roughly determined by allowing ____ lbs of nails for every 1000 square feet of sheathing.

Hardware for rough carpentry, including nails and other fastening devices, is usually priced as a percentage of the price for lumber.

____ hardware for lumber mostly consists of nails, but other fasteners and such items as joist hangers may also be required.

Fabricating and installing roof components such as hips, valleys, ridges, and rafters require far more time than fabricating and installing plain joists.

One of the categories by which lumber is graded is decking.