Question 1

A(n)  ____ may require that a specific code or standard be followed, whereas in ____, the code used is considered to be the standard for the industry and has been in use a long time.

Accepted Answer

A)   local, state, or federal government; standard industrial practices
B)   local, state, or federal government; bonding or insuring companies
C)   end user, standard industrial practices
D)   end user, bonding or insuring companies

Question 2

____ are those in which a change is considered to affect the mechanical properties of the weldment to the point of requiring requalification of the procedure.

Accepted Answer

A)   Essential variables
B)   Nonessential variables
C)   Code parameters
D)   WPS parameters

Question 3

____________________ is the standard federal government, military, or aerospace terminology denoting a WPS.

Accepted Answer

The answer of ____________________ is the standard federal government, military,...

Question 4

If the machine being used for the weld does not have an amp meter, a meter must be attached to the welding lead, within ____ ft. of the electrode holder, to get the reading of the amount of current in amps used to make the weld.

Accepted Answer

A)   one
B)   two
C)   three
D)   four

Question 5

Who should supervise the testing of your weld?

Accepted Answer

A)   A friend, so they can help you prepare the test specimens because all of that grinding is hard work
B)   The person who wrote the code
C)   Your welding teacher or a school administrator
D)   The same individual or group that witnessed you taking the test

Question 6

Unlike the AWS D1.1 or the ASME Section IX, the ____________________ requires a "Nick-Break Test Specimen."

Accepted Answer

The answer of Unlike the AWS D1.1 or the ASME...

Question 7

____ is a specific grouping number for several classifications of electrodes having similar composition and welding characteristics.

Accepted Answer

A)   Classification number
B)   Filler metal specification number
C)   F-number
D)   A-number

Question 8

If a welder is not engaged in the specific process of welding for which he or she is qualified for a period exceeding ____, the welder must requalify.

Accepted Answer

A)   two months
B)   six months
C)   one year
D)   two years

Question 9

____ is the ASTM specification for the type and grade of material, including the P-number.

Accepted Answer

A)   Filler metal specification
B)   Electrode specification
C)   Base metal specification
D)   Backing strip material specification

Question 10

The ____ by the specimen's original area converts the ultimate total load for the specimen to the pounds per square inch (psi)  that was required to break the material.

Accepted Answer

A)   minimum load multiplied
B)   maximum load multiplied
C)   minimum load divided
D)   maximum load divided

Question 11

A welding ____________________ is a detailed statement of the legal requirements for a specific classification or type of weld to be made on a specific product.

Accepted Answer

The answer of A welding ____________________ is a detailed statement...

Question 12

Which of the following is true about qualifying the WPS?

Accepted Answer

A)   It must be qualified to verify that the list of variables will provide a sound weld.
B)   It is not necessary to keep a record of all parameters used to produce test welds.
C)   The PQR is for the benefit of the welder; the inspection agency will not request it.
D)   Sample welds are prepared using an established code or specification.

Question 13

____ is the classification of weld metal analysis.

Accepted Answer

A)   F-number
B)   A-number
C)   Filler metal specification number
D)   Classification number

Question 14

The welding current should be listed as________________.

Accepted Answer

A)   AC, DCEP, or DCEN
B)   straight or reverse
C)   60 cycle
D)   DCSP or DCRP

Question 15

A qualified WPS is usable for ____.

Accepted Answer

A)   six months
B)   one year
C)   an indefinite length of time
D)   an indefinite length of time, usually until a more efficient process is found

Question 16

In a PQR, flow rate should be recorded in ____.

Accepted Answer

A)   cubic feet per second
B)   cubic feet per minute
C)   cubic feet per hour
D)   square feet per hour

Question 17

The most commonly used code for pressure vessels and nuclear components is ____________________.

Accepted Answer

The answer of The most commonly used code for pressure...

Question 18

The most commonly used code for pipelines is ____________________.

Accepted Answer

The answer of The most commonly used code for pipelines...

Question 19

What steps must be taken if the test samples do not pass the applicable test in the qualifying and certifying process?

Accepted Answer

If the test samples do not pass the appl...

Exam 24: Welding Codes and Standards

Which of the following is true about qualifying the WPS?

Correct Answer
verified

Unlike the AWS D1.1 or the ASME Section IX, the ____________________ requires a "Nick-Break Test Specimen."

Correct Answer
verified

____________________ is the standard federal government, military, or aerospace terminology denoting a WPS.

Correct Answer
verified

If a welder is not engaged in the specific process of welding for which he or she is qualified for a period exceeding ____, the welder must requalify.

Correct Answer
verified

In a PQR, flow rate should be recorded in ____.

Correct Answer
verified

The ____ by the specimen's original area converts the ultimate total load for the specimen to the pounds per square inch (psi) that was required to break the material.

Correct Answer
verified

____ is the classification of weld metal analysis.

Correct Answer
verified

If the machine being used for the weld does not have an amp meter, a meter must be attached to the welding lead, within ____ ft. of the electrode holder, to get the reading of the amount of current in amps used to make the weld.

Correct Answer
verified

A qualified WPS is usable for ____.

Correct Answer
verified

The most commonly used code for pipelines is ____________________.

Correct Answer
verified

____ is the ASTM specification for the type and grade of material, including the P-number.

Correct Answer
verified

The welding current should be listed as________________.

Correct Answer
verified

____ is a specific grouping number for several classifications of electrodes having similar composition and welding characteristics.

Correct Answer
verified

A welding ____________________ is a detailed statement of the legal requirements for a specific classification or type of weld to be made on a specific product.

Correct Answer
verified

A(n) may require that a specific code or standard be followed, whereas in , the code used is considered to be the standard for the industry and has been in use a long time.

Correct Answer
verified

Who should supervise the testing of your weld?

Correct Answer
verified

____ are those in which a change is considered to affect the mechanical properties of the weldment to the point of requiring requalification of the procedure.

Correct Answer
verified

What steps must be taken if the test samples do not pass the applicable test in the qualifying and certifying process?

Correct Answer
verified
If the test samples do not pass the appl...
View Answer

The most commonly used code for pressure vessels and nuclear components is ____________________.

Correct Answer
verified

Exam 24: Welding Codes and Standards

Which of the following is true about qualifying the WPS?

Correct AnswerverifiedShow Answer

Unlike the AWS D1.1 or the ASME Section IX, the ____________________ requires a "Nick-Break Test Specimen."

Correct AnswerverifiedShow Answer

____________________ is the standard federal government, military, or aerospace terminology denoting a WPS.

Correct AnswerverifiedShow Answer

If a welder is not engaged in the specific process of welding for which he or she is qualified for a period exceeding ____, the welder must requalify.

Correct AnswerverifiedShow Answer

In a PQR, flow rate should be recorded in ____.

Correct AnswerverifiedShow Answer

The ____ by the specimen's original area converts the ultimate total load for the specimen to the pounds per square inch (psi) that was required to break the material.

Correct AnswerverifiedShow Answer

____ is the classification of weld metal analysis.

Correct AnswerverifiedShow Answer

If the machine being used for the weld does not have an amp meter, a meter must be attached to the welding lead, within ____ ft. of the electrode holder, to get the reading of the amount of current in amps used to make the weld.

Correct AnswerverifiedShow Answer

A qualified WPS is usable for ____.

Correct AnswerverifiedShow Answer

The most commonly used code for pipelines is ____________________.

Correct AnswerverifiedShow Answer

____ is the ASTM specification for the type and grade of material, including the P-number.

Correct AnswerverifiedShow Answer

The welding current should be listed as________________.

Correct AnswerverifiedShow Answer

____ is a specific grouping number for several classifications of electrodes having similar composition and welding characteristics.

Correct AnswerverifiedShow Answer

A welding ____________________ is a detailed statement of the legal requirements for a specific classification or type of weld to be made on a specific product.

Correct AnswerverifiedShow Answer

A(n) ____ may require that a specific code or standard be followed, whereas in ____, the code used is considered to be the standard for the industry and has been in use a long time.

Correct AnswerverifiedShow Answer

Who should supervise the testing of your weld?

Correct AnswerverifiedShow Answer

____ are those in which a change is considered to affect the mechanical properties of the weldment to the point of requiring requalification of the procedure.

Correct AnswerverifiedShow Answer

What steps must be taken if the test samples do not pass the applicable test in the qualifying and certifying process?

Correct AnswerverifiedIf the test samples do not pass the appl...View AnswerShow Answer

The most commonly used code for pressure vessels and nuclear components is ____________________.

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

A(n) may require that a specific code or standard be followed, whereas in , the code used is considered to be the standard for the industry and has been in use a long time.

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
If the test samples do not pass the appl...
View Answer

Correct Answer
verified