Filters
Question type

Study Flashcards

The ____________ has developed a color code for the different gases and gas mixtures.


A) U.S.Department of Transportation (DOT)
B) Compressed Gas Association (CGA)
C) Pin Index Safety System (PISS)
D) National Fire Protection Association (NFPA)

Correct Answer

verifed

verified

B

What is the purpose of 'cracking' a cylinder before use?


A) This primes the system with oxygen so there is no air mixed in with the oxygen with the first part of the gas delivered to the patient.
B) This removes any dust,or particulate matter,from the outlet of the cylinder valve.
C) It causes the regulator to become pressurized precisely to 50 psi before gas is delivered to the patient.
D) It pressurizes the cylinder to make sure it will not leak and compensate for the cylinder until the cylinder is hydrostatically tested.

Correct Answer

verifed

verified

B

Which cylinder valve is found on gas cylinders containing less than 1500 psi of pressure?


A) Direct-acting cylinder valve
B) Stem valve
C) Diaphragm cylinder valve
D) Outlet valve

Correct Answer

verifed

verified

The connection for attaching equipment for patient use is termed a station outlet.These outlets have what kind of fittings?


A) Quick-connect fittings
B) Diameter-index safety system fittings
C) Reducing valve fittings
D) Either a or b

Correct Answer

verifed

verified

What is a device called that provides a precise oxygen concentration between 21% and 100% by mixing air and oxygen?


A) Riser
B) Concentrator
C) Blender
D) Multi-stage regulator

Correct Answer

verifed

verified

Hydrostatic testing is required for all cylinders every _____________


A) year.
B) 5 to 10 years.
C) 10 to 15 years.
D) 15 to 20 years.

Correct Answer

verifed

verified

If a cylinder needs to be placed in the horizontal position for a transport,which type of flowmeter would be the best to use?


A) Multi-stage regulator
B) Back-pressure compensated flowmeter
C) Uncompensated Thorpe Tube flowmeter
D) Bourdon gauge

Correct Answer

verifed

verified

Medical gas supply systems include all of the following EXCEPT ______________


A) medical gas cylinders.
B) liquid systems.
C) oxygen concentrators.
D) oxygen regulators.

Correct Answer

verifed

verified

D

Because of the high pressure contained in a medical gas cylinder,a device is needed to contain the gas and to provide a point of attachment for equipment.What is this called?


A) Outlet
B) Stem
C) Pin valve
D) Cylinder valve

Correct Answer

verifed

verified

Certain substances,when exposed to oxygen,may ignite with great force without the addition of heat to initiate the process.This phenomenon is termed __________________


A) the tank factor.
B) cracking a cylinder.
C) spontaneous combustion.
D) hydrostatic testing.

Correct Answer

verifed

verified

Because large medical gas cylinders (larger than 'E' sized) may contain a variety of gases besides oxygen,a safety system was designed by the CGA to prevent the interchange of cylinders containing dissimilar gases.What is the name of this system?


A) Frangible Disk
B) Diameter-indexed Safety System
C) Pin Index Safety System
D) American Standard Safety System

Correct Answer

verifed

verified

A piping system is required to have a reserve or backup supply of oxygen.What is the minimum amount of time the reserve system must be able to meet a facility's oxygen needs?


A) 12 hours
B) 24 hours
C) 36 hours
D) 48 hours

Correct Answer

verifed

verified

If a cylinder valve is exposed to excessive temperature in a fire,which type of safety system is incorporated into the valve to release gas pressure?


A) Fusible plug
B) Frangible disk
C) Diameter-indexed Safety System (DISS)
D) Pin Index Safety System (PISS)

Correct Answer

verifed

verified

A device that reduces the pressure in the medical gas cylinder from 2200 psi to 50 psi is termed a ________________


A) riser.
B) flowmeter.
C) reducing valve.
D) station outlet.

Correct Answer

verifed

verified

The most common service pressure indicated on an oxygen cylinder that is followed by a (+) sign is ___________.


A) 50 psi
B) 2200 psi
C) 2015 psi
D) 2 psi

Correct Answer

verifed

verified

What is the color code for an air cylinder?


A) Yellow
B) White
C) Gray
D) Red

Correct Answer

verifed

verified

Which organization recommends the standards for construction of medical gas piping systems?


A) Compressed Gas Association (CGA)
B) National Fire Protection Association (NFPA)
C) Department of Transportation (DOT)
D) Bureau of Standards (BOS)

Correct Answer

verifed

verified

A patient needs to be transported from the emergency department to the ICU on a 50% Venturi mask.What oxygen equipment is needed for you to accomplish the transport?

Correct Answer

verifed

verified

An oxygen cylinder is needed to provide ...

View Answer

You are going to transport a patient to the MRI department for a MRI scan.The patient is on a non-rebreathing mask at 15 LPM.The procedure will last approximately 60 minutes.What equipment should the practitioner gather for the transport?

Correct Answer

verifed

verified

The practitioner will need several full ...

View Answer

Cylinders manufactured for the transport of medical gases are constructed in accordance with regulations specifically established by the __________________


A) Department of Transportation (DOT) .
B) Compressed Gas Association (CGA) .
C) National Fire Protection Association (NFPA) .
D) American Standard Safety System (ASSS) .

Correct Answer

verifed

verified

Showing 1 - 20 of 28

Related Exams

Show Answer